Applications: 4 pin, 2 connector Telephone Handset 4 pin, 4 connector Telephone Handset 6 pin, 4 connector RJ-11 6 pin, 6 connector RJ-12 6 pin, 6 connector DEC OFFSET 8 pin, 8 connector RJ-45 10 pin, 10 connector Ratchet Mechanism with safety release Straight motion die mechanism for precise crimps Built-in cutter and stripper Instruction:　 ▲Straight motion and precise crimping. ▲Cuts ,strips,and crimps all kinds of modular plug WITHOUT CHANGING MODULAR(DIE)SET ▲More in one for crimping SOLID & STRANDED wire. Work with all strandard plugs:AMP,SS,AT&T licence... etc. ▲Tool TL-200/200R design with 10 position punches. For crimping 8P8C plug,please use the AMP 8P8C plug that with 2 cavities on each side as Fig 1. ▲For stripping, there is a length guide at inside of 6mm area. Insert 4P or 6P conductor wire touch the length guide(GUIDE BY ZINC PLATING) then press handles and pull wire to get right stripping.As 12mm is decided by cutting blade. Insert 8P or 10P conductor wire over cutting blade,so the tool cuts and strips wire at the same time. ▲Tool 2008/2008R design with 8 position punches. For crimping the ordinary 8P8C plug.This kind of 8P plug without additional cavity on each side as Fig2. ▲TL-200/200R/2008/2008R parts are made of metal.All are rigid and durable. ▲Built-in cutter on rear side and stripper on front side. ▲For stripping round solid telephone wire,tool TL-S501A/TL-S501B is effective and recommendable. ▲Adjusting the 6P guide for crimping:use a ″－″shape SCREW DRIVER to set the guide to right side for crimping normal 6P plug,and set the guide to left side for crimping DEC plug.