WDM Media Converter ,10/100M WDM Media Converter FTTH stand-alone media converters comply with IEEE802. 3, IEEE802. 3u and IEEE802. 3x Standards. It is designed to convert data signal between 10/100 Base-Tx and 10/100 Base-Fx fast Ethernet. The data signal converted by such high performance of the media converters can be transmitted up to 120km by optical cable. The converters are equipped with two optical connectors, one for transmitting-Tx and the other for receiving-Rx, and one RJ-45 port supporting auto-negotiation MDI/MDI-X. Six LED indicators are built-in for diagnosing and monitoring the working status of the device. The media converter is compact, cost-effective, low power consumption, reliability and stability. When it is used as stand-alone one, the applicable power supply can be chosen as 220VAC or -48VDC. Specifications: Standards: IEEE802. 3, IEEE802. 3u, IEEE802. 3x Data Rate: 10/100Mbps Operating Wavelength: 1310+(-)25nm, 1550+(-)25nm Transmit distance: Multi-mode: 2Km Single-mode: 20Km, 40Km, 60Km, 80Km, 120Km Fiber Interface: SC Fiber type: Multi-mode: 50/125um or 62. 5/125um Single-mode: 9/125um RJ45 port: UTP-100ohm Cat. 5 cable up to 120m Internal Power Supply: 100~275VAC, 50~60Hz, 0. 2A Power consumption: 5W Operation temperature: 0C~60C Storage temperature: 10C~70C Humidity: 5%~95%(Non-condensing) Dimension: 120*88*16mm (External power supply)/ 160mmx129mmx33mm (Internal power supply) Power Indicator: Green On when it is connected to the power supply RX Activity: Green Flash when TP data is active TXL Link Status: Green On when TP connection is good; Flash when TP data is active FXL Link Status: Green On when fiber connection is good; Flash when fiber data is active FDX Full or Half Duplex: Green On when full-Duplex mode is active SPD Speed Indicator: Green On when speed is 100M